Moore Company Pricing Index - lockerbasket, service, parts, product literature, pricing, hooks, moorframe, bench systems, support, pedestal, clips,

PRICING REQUEST

LOCKERBASKET Systems

Qty

MS-614 Six (6) Hook LOCKERBASKET System

Six (6) Hook LOCKERBASKET System comes complete with standard cable-chain operating equipment for an average 16'-0" (4880 mm) ceiling height, as per specifications outlined in box at bottom right of p...

Qty

MS-683 Six hook LOCKERBASKET w/ locker operating equipment

Six hook LOCKERBASKET complete with standard locker operating equipment for an average 16 foot ceiling height, as per specifications, (see box at bottom right corner of this page) and 3'-0" of MOORFRA...

Qty

MS-214 Two (2) Hook LOCKERBASKET System

Two (2) Hook Moore LOCKERBASKET comes complete with standard cable-chain operating equipment for an average 16'-0" (4880 mm) ceiling height, as per specifications, (see specifications in box at bottom...

Qty

MS-283 Two hook LOCKERBASKET c/w Locker operaining equipment and 3'-0" MOORFRAME

Two hook LOCKERBASKET complete with standard locker operating equipment for an average 16 foot ceiling height, as per specifications, (see box at bottom right corner of this page) and 3'-0" of MOORFRA...

Bench Systems

Qty

MS-371 Single pedestal locking rail-bench support units

Used to support ALUMIBENCH at 6'-0" maximum spacing between pedestals complete with hold down clips.

Qty

MS-372 Double pedestal locking rail - bench support unit

Double pedestal locking rail and bench support units are necessary when back to back rows of ALUMIBENCH are specified and the LOCKERBASKETS are secured using a locking rail. Pedestals are required eve...

Qty

MCO-30 ALUMIBENCH

Pricing is per foot. ALUMIBENCH is supplied in 12'-0" lengths and is shipped complete with bench end caps. Please advise the number bench end caps required. Also note that the ALUMIBENCH requires pede...

Qty

MCO-34 Free Standing Pedestal

The free standing pedestal is fabricated from 1/4" bent plate and galvanized after fabrication. It is used for supporting the ALUMIBENCH when used with lockers and as waiting room seating. A free stan...

Qty

MCO-31 Hold Down Clips

The hold down clip is aluminum with 5/16" bolt & nut for use to fasten the ALUMIBENCH to the pedestal.

Qty

MCO-32 ALUMIBENCH protective end cap

Bench end caps are required at the end of every ALUMIBENCH run. Each end cap comes complete with two (2) drive rivets.

Qty

MCO-33 Pedestal for locking rail support

The bench pedestals are use with the locking rail support tube to support the ALUMIBENCH. Pedestals are galvanized and come complete with hold down clips, 5/16" attaching bolts and serrated locking nu...

Qty

MCO-37 Locking Rail Support Tube

The locking rail support tube is a 2" x 2" x 4'-6 1/2" steel tube and hot dipped galvanized after fabrication. It comes complete with two 3/8" diameter attaching bolts and hex nuts for attaching one o...

Individual System Components

Qty

MS-10 Standard Operating Equipment

The standard cable / chain operating equipment is used for securing the LOCKERBASKET to the structure and for raising and lowering the basket. Specifications for the standard operating equipment are l...

Qty

MS-80 Locker Operating Equipment

The locker operating equipment allows the hoisting assemly for the LOCKERBASKET to be secured and operated from within a floor locker. The system consists of the Standard LOCKERBASKET Cable/Chain oper...

Qty

MCO-28 MOORFRAME

MOORFRAME is priced by the foot. The channels are galvanized and prepunched to specifically fit hardware used to support the baskets from the ceiling and as the locking rail. MOORFRAME channels are on...

Qty

MS-600 Six (6) Hook LOCKERBASKET only

Six (6) hook LOCKERBASKET consists of the wire basket, six hook hanger, two guide bolts with nuts and six clothes hook guards. Shipped unassembled.

Qty

MS-200 Two (2) Hook LOCKERBASKET only

Two (2) Hook LOCKERBASKET consists of the wire basket, a two hook hanger, two guide bolts and two clothes hook guards. Shipped unassembled.

Qty

MCO-4 Guide Bolt

The guide bolt is used to secure the six or two hook hanger to the wire basket. The galvanixed bolt is 1/4" in diameter and is shipped with a 1/4" hex nut.

Qty

MCO-7 Pulley

The cable groove pulley features a 4 3/8" self lubricating black nylon sheave designed with a cable nesting groove and high side wall sheave. The universal swivel design allows the collector rail pull...

Qty

MCO-8 "U" Bolt

The "U" Bolt is a 1/4" galvanized bolt with a locking nut. it is is used to support the pulley from the overhead MOORFRAME. One is required per pulley.

Qty

MCO-15 Locking Bolt

The galvanized 5/16" locking bolt is used to secure the chain hoisting assembly to the locking rail and to secure the LOCKERBASKET in the hoisted position when the locking plate is place over the lock...

Qty

MCO-16 Number plate

Number plates are flat, stainless steel plates prepunched to fit over locking bolt. Unless specified, engraved numbers will begin with 1 and continue successively to the amount equal to the number of ...

Qty

MCO-18 Vinyl Clothes Hook Guards

Vinyl clothes hook guards are used to protect clothing from becoming damaged by the hanger hooks while being stored.

Qty

MCO-19 Vinyl Cable Sleeve Guards

The vinyl sleeves are used to provide safety protection for cable ends.

Qty

MCO-23 Polycore Cable

The Moore Polycore cable is a 1/8" preformed galvanized carbon steel cable with polycore center. It is specially fabricated to conform to the MCO-7 Cable Pulley. Priced per foot.

Qty

MCO-24 Duplex Serving Sleeve

The 1/8" duplex aluminum serving sleeves are used for making cable loops used to connect cable to hoisting assembly at one end and LOCKERBASKET at the other.

Qty

MCO-25 Thimble

The zinc plated thimble is used to form a cable loop at either end of the average 16'-0" run. The thimble protects the cable from wear caused by abrasion with the spring and locking plate attachments....

Qty

MCO-26 Compression Tool

The Compression Tool is used to properly form the aluminum oval cable sleeves to create a loop on either end of the cable for attaching the chain hoisting assembly on one end and LOCKERBASKET at the o...

Qty

MCO-40 Locking Rail End Cap

The locking rail end cap is used to cover the edges of MOORFRAME. Molded from Zytel #114 Black plastic.

Supplemental Equipment

Qty

MS-70 Cable/Chain Conversion Package

Qty

MCO-17 Padlocks, masterkeyed

Padlocks come in one of two styles are are shipped with two (2) keys. All locks are Mastered keyed.

Qty

MCO-21 Dividing Curtain

The Dividing Curtain is manufactured from a heavy duty vinyl 20" x 48" sheet. Each curtain comes complete with two attaching links.

Qty

MCO-50 Garment Bag

The garment bag completely encloses clean garments and protects clothing from airborne contaminants or other soiled clothes. Garment bag attaches around the standard LOCKERBASKET hooks and access is g...

Qty

MCO-65 Boot Hangers

Epoxy coated boot hangers are shipped in pairs. They are designed to be securely mounted on each side of the standard LOCKERBASKET.

Individual Replacement Parts

Qty

MCO-1 Wire Basket only

The wire basket and coat hanger is part of the LOCKERBASKET but without the hanger hooks. It is fabricated from welded wire and epoxy coated after fabrication.

Qty

MCO-2 Two - Hook Step-Lok clothes hook hanger (only)

Hanger, complete with guide bolts for attaching hanger to LOCKERBASKET.

Qty

MCO-22 Attaching Link

Attaching links are used to secure the dividing curtain to the bottom center of a LOCKERBASKET. Two attaching links are required per dividing curtain.

Qty

MCO-27 Cable Cutter

The 1/8" cable cutters feature a special jaw formation that prevents the cable wire from flattening and spreading to insure a clean cable cut.

Qty

MCO-3 Six - Hook Step-Lok clothes hanger only

Six - hook hanger, complete with guide bolts for attaching to LOCKERBASKET.

Qty

MCO-5 Cushion Spring Assembly

The cushion spring assembly comes complete with a galvanized cushion spring, two spring links and a vinyl spring cover.

Qty

MCO-5A Cushion Spring Only

Galvanized spring designed to absorb 125 foot pounds

Qty

MCO-5B Cushion Spring Link only

Two spring links are required per cushion spring.

Qty

MCO-5C Cushion Spring Cover only

One vinyl spring cover is required per spring.

Qty

MCP-8 Securing Plate Assembly

The securing plate assembly is used use when the hoisting system is operated from inside floor locker.

Qty

MSA-10 Chain Hoisting Assembly Only

The chain hoisting assemly comes with factory assembled 9'-0" and the MSA-12 Locking Plate and swivel sub-assembly.

	USERNAME: PASSWORD: Forgot Your Password?

Specifications for:

Standard Operating Equipment

1 Chain hoisting assembly (factory assembly comprised of 9'-0" of chain, bi-directional, 360 degree swivel and locking plate). Assembly designed for 1,760 tensile strength, 440 lbs working load.

16 feet of Moore 1/8� galvanized steel pre-drawn Polycore Cable, for operating over pulleys. Cable designed for 1,400 lbs tensile strength, 280 lbs working load.

1 5/16 inch Locking Bolt Assembly (for anchoring Chain Hoisting Assembly to MOORFRAME and securing the LOCKERBASKET to the locking rail), locking nut and retainer disk.

1 Polished flat stainless steel number plate, with sunken and enameled numerals. (Specify numerical sequences.)

1 Moore aluminum duplex serving sleeves, vinyl sleeve guards and galvanized thimbles for cable assembly.

1 Double swivel eye pulleys 4 3/8� diameter self-lubricating nylon sheaves and 16-gauge aluminum housing and dual action swivel.

1 �� U� Bolts for attaching to overhead MOORFRAME supports, galvanized after fabrication.

1 Cushion Spring Assembly, designed to absorb 125 foot pounds impact shock complete with connecting links, fabricated from annealed spring wire, hardened, tempered and galvanized after fabrication and vinyl spring cover.

NOTE: One (1) set of cable tools are furnished without charge on orders of 50 LOCKERBASKETS or greater. Orders fewer than 50 LOCKERBASKETS or for replacement parts, tools can be provided on a Memo invoice.

Locker operating equipment is comprised of the standard operating equipment listed above, less the MCO-15 Locking Bolt, MCO-16 number plate and includes the MCP-8 Securing Plate Assembly.

Locker Operating Equipment